Showing posts tagged with: security system
Posted by: Century on November 11st, 2014 @ 6:00 PM
Tagged with: Access Control Access Control Intercom Audio Entry Automation DDA Security Entry Gates Installer Machinery Directive maintenance Prevention Safety Security security system system takeovers
Gate Satefy Systems
Century Electronic Security Ltd take safety seriously, measures taken on every installation ensure you the client have not only the best quality products to match your requirements but also the safest, that comply with all current safety legislation.
In June 2010, the tragic deaths of two young children inseparate incidents less than one week apart served to highlight the safety issues facing the UK gate automation industry. This was particularly the case since these tragedies followed so soon after the conviction of a gate manufacturer for breaches of health and safety law inrelation to an earlier child fatality.
The legal position is that powered gate systems are considered to be “machinery”. This means that, by law,every new powered gate, when it is put into service, must comply with the European Machinery Directive(2006/42/EC), especially the Directive’s Essential Health and Safety Requirements, be CE marked and accompanied by a Declaration of Conformity. The Health and SafetyExecutive has lead responsibility for enforcement of this legislation, which has been transposed into UK law as theSupply of Machinery (Safety) Regulations 2008. The responsibility for complying with the law rests with the responsible person which will be either the manufacturer,supplier or installer, depending on the circumstances.
The key to compliance with the law is risk assessment,which includes identifying the hazards, estimating theseverity and likelihood of each hazard, followed by an evaluation to determine whether each hazard is adequately controlled and, if it is not, what further action needs to be taken to control the risk; the principal aim isto secure compliance with the Machinery Directive’s Essential Health and Safety Requirements.
Some guidance on hazards presented by powered gates is given below. There are also European standards covering safety requirements and test methods; use of these standards will simplify risk assessment and compliance may also create a presumption of compliance with the law. It should, however, be noted that these standards were, for the most part, writtenfor use in a factory environment and it may not be possible to carry out all the necessary tests where a gate is created on site.A brief description of the available standards is given.
Responsibilities of the installer/manufacturer
A new powered gate installation must comply with the Machinery Directive, particularly the safety requirements set out in theEssential Health and Safety Requirements. In most cases, the final responsibility for ensuring this will lie with the installer. Thiswould apply in all of the following situations:
• The installer manufactures the gate and drive unit, including the controller
• The installer manufactures the gate, but uses controllers and drive units from another manufacturer
• The installer buys the gate, controllers and drive units from other manufacturers, and commissions the final assembly
However, when a complete gate is placed on the market, such as a “factory manufactured” gate supplied with all ancillary parts (all drive units, safety devices, and control units), and comprehensive installation and setting instructions, the person placing the product on the market will have the responsibility of complying with the Machinery Directive. The installer still has responsibility under the Health and Safety at Work Act 1974 to ensure the gate has been installed correctly and safely in accordance with those instructions, including any adjusting and setting of the safety devices.
To recieve a free no obligation risk assesment of your existing Gate system or if you are considering installing a new gate or gate automation system call Century on 0800 052 6070.
When looking for a CCTV Security System for your home or your business, one of the main decisions you need to make is whether to go with an IP or Analogue System. There are many differences between the two, yet the main difference is the way in which the video signal is delivered.
Analogue Cameras turn the video signal into a format that can be received by televisions and monitors. IP Cameras however (also known as an IP Network Camera) digitalize the video signal using a specialised encoder, which contains an onboard web server.
At Century Electronic Security Ltd, we can advise and guide you to chose the best system to meet your specific home or business requirements.
- The Installation and the cameras themselves are a lot cheaper than IP Cameras (however, research shows that IP prices are continually lowering)
- Almost every Analogue CCTV Camera will plug into any DVR, allowing you to easily customise and upgrade your system whenever.
- They require very little maintenance, although we do strongly recommend an annual service to be taken out by a qualified engineer, who will check the complete system thoroughly to prevent any potential faults from occurring.
- Analogues can also perform better in low light and darkness. This is because most use either a CCD image sensor or Infra-Red, allowing cameras to record images even if they are in complete darkness.
- Analogue Cameras can only produce a maximum of 700TVL (which is equivalent to around 0.4 megapixels)
- They can't cover large distances, so this will require more cameras. (Not only this, but getting cameras to work over broad ranges is proved quite difficult)
- Many basic Analogue Cameras lack some of the more advanced features such as digital zoom or tilting.
- The signals are less secure and can be intercepted or viewed by anyone with access to the cabling.
- IP Cameras can range from 1.3 megapixels to 8 megapixels and this resolution is retained by the NVR (meaning that you will see the same level of play back from your recorded footage)
- They can cover a much wider area than a standard Analogue Camera (a single megapixel camera can often cover the same area as up to four Analogue Cameras)!
- The main advantage to an IP Camera is the ability it has to add on cameras by plugging into any network connection.
- They can be simply wired into the nearest network switch where it uses the existing network infrastructure to take the signals back to the DVR.
- The IP Camera has encryption built into them, providing for a more secure network. Interference is also not a problem with any IP based model
- Because of the additional technology that is built into each camera, the cost is generally higher.
- They deliver great megapixel resolution, but do not handle low light well. However, if needed, separate IR Illuminators can be added onto the camera (again, at another cost)
- An IP megapixel surveillance system is set up specifically to work with the network protocol it is designed for, meaning different IP Cameras and NVR brands may not be compatible.
Posted by: Century on May 20th, 2014 @ 2:56 PM
Tagged with: Access Control Access Control Intercom Audio Entry Coded Entry DDA Security Entry Disabled Access Intercom Systems Safety Security security system Video Entry
If you are a business owner looking to improve productivity within your business, you have to employ the right security measures to protect not only your valuable assets but your employees.
When your business area is secured, your employees will feel secure too and they can then focus better on their jobs. Not only this, but you as the business owner will not have to worry about your commercial property being targeted by criminals.
Currently, there are many different Access Control Systems that can be applied to your business to improve the security, such as:
- Card or Fob Entry
- DDA Security
- Coded Entry
- Video or Audio Entry
Whether your businesses requirements may be from large security systems to minor entry systems, we at Century Electronic Security offer the highest standards of care and equipment, giving you peace of mind that you are completely protected. Please see below for how you are set to benefit if you were to invest in an Access Control System:
You have complete control...
When it comes to a business's security, we take matters seriously. As a business owner you don't want to be staying up late at night wondering if your business will be safe or not. But once you have an Access Control System installed; only authorised staff members and individuals can have access to certain premises. To gain entry to them, they must have been given their own personal business PIN, ID Cards or Fobs or registered with the Biometric System (finger print recognition or iris scanner) to be identified and granted access.
Added protection to your most valuable assets...
Valuable assets can be a range of products, dependent on your businesses nature. Assets can be office computers and stationery to cars and shop merchandise. Installing an Access Control System will help you to restrict the traffic to the most delicate areas of your premises. Even when all employees and visitors have been screened, certain information and assets must only be used, seen or authorised personnel. When access is restricted in a particular area (like a stores rooms for parts or products), anyone who attempts to steal or carry out malicious activity within this area will find it very difficult to do so!
Easy to scale up - big or small...
Whether you are a small business or a large business, you need a system that will fit your security requirements, whilst allowing you to expand as your business grows. Access Control Systems are easy to scale up and can be used on more than one site, meaning you'll be safe in the knowledge that even when you need to set up a new location, your security requirements will be taken care of.
When you are able to control who gets into your premises and how they can move once they are inside, the risks of theft are then greatly lowered.
If you require an Access Control System for your company or would like to find out more information, please do not hesitate to contact us on our FREEPHONE on 0800 052 6070 and we will help you find the right system to suit your businesses demands.
Or, if you would like to find out about our range of Access Control Systems, please click here.
Posted by: Century on March 20th, 2014 @ 10:53 AM
Tagged with: Burglar Alarm Burglary Intruder Alarm Intruder Alarm Systems maintenance Safety Security security system system takeovers Wired Wired Alarm Systems Wireless Wireless Alarm Systems
False alarms are a problem for everyone. They can be a nuisance to not only yourself, but to your neighbours especially! It is an ongoing effort to reduce the number of false alarms our customers and non-customers experience. Here are a few simple tips on how to eliminate false alarms.
- Have your Intruder Alarm System installed by a qualified and reputable Electronic Security Company.
- Ensure that you have your system maintained and serviced once a year by a professional company, as this will help prevent potential faults from occurring and ensures that all parts are in good working order.
- Regularly inspect all detectors for signs of dust, spiders, webs, moisture or anything else that could trigger the alarm when armed.
- Ensure you are provided with an Intruder Alarm System Manual.
- Make sure that any panic buttons are not easily accessible to children and/or pets.
- If you have a Wireless System, ensure that all batteries are changed regularly.
- Do not leave balloons or other moveable items in a room that has a motion detector
- Eliminate any rodents or other pests/insects (as these are the most common causes of false activations on alarms)
- Ensure that everyone using the system has been trained to do so and knows all of the codes needed
- Upgrade aging or outdated equipment as older systems are far more prone to false alarms.
- In the event of a false alarm activation, investigate what the cause was and take the necessary steps to ensure that it doesn't occur again.
- Regularly test your Intruder Alarm System to make sure that it is functioning correctly.
Talk to us today about Intruder Alarm Systems
If you require any more information about maintenance and service packages for your system, please do not hesitate to contact us on our freephone 0800 052 6070.
Posted by: Century on March 6th, 2014 @ 4:22 PM
Tagged with: Break-in Burglar Alarm Burglary Intruder Alarm Intruder Alarm Systems monitoring Safety Security security system system takeovers Wired Wired Alarm Systems Wireless Wireless Alarm Systems
Choosing a security system for your home is something that can take a bit of consideration and time. It is very important that you research into your potential security system as much as you can to ensure that you have selected the system that best fits your needs. The main aspect that you will consider when is whether you need or prefer a Wireless or Wired Alarm System.
Century Electronic Security has provided below a list of the significant differences in the installation of both types and a few "Pros and Cons" for each that you should consider...
Wired Alarm System
This type of system generally involves the use of sensors that can be installed onto windows and doors in your home. They are wired to the main panel of your security system panel and can be hidden under floorboards, skirting boards and carpets.
- Less maintenance is required
- They allow a greater distance between each device
- They tend to be much cheaper
- Receives no interference from other electrical devices
- If at any time the wiring is cut, the alarm will sound immediately
- Installation takes a lot of effort
- It can be difficult to hide the cables
- Installation can also take up a lot of time
- Could possibly mean taking up floorboards, pulling off side boards and drilling into walls
Wireless Alarm System
These systems work in a similar way, as sensors are place on windows and doors too, but instead of linking these sensors via wiring that is hidden away; the sensors transmit information to the main panel by using a wireless technology.
- Installation requires much less effort
- Adding extra features such as sensors is very simple
- They are easy to move about (if you are to move house)
- Installation time is a lot quicker
- No cables and no mess
- More maintenance is required for batteries and other products
- There are limitations in terms of distance
- They can be relatively more expensive than a wired alarm
- They cannot achieve a security grading above the standard grade 2
- They can be disabled easier than a wired system
While a Wired Alarm System is considered to be the more reliable of the two, it can be difficult to choose what is best for your individual requirements. Both types of systems can be enhanced with a variety of options such as cameras, extra sensors, intercom systems and even monitoring. We can advise and guide you to choose the correct system for your home.
Talk to us today
Don't hesitate, contact us today on 0800 052 6070 and see exactly how we can help you.
Posted by: Century on February 24th, 2014 @ 10:24 AM
Tagged with: Break-in Burglar Alarm Burglary Intruder Alarm Intruder Alarm Systems maintenance Safety Security security system system takeovers
It can be extremely easy to look over the security of your home by missing out on having your annual maintenance service for your Intruder Alarm System. But in missing this, can you be sure that you will be aware of an important issue (that could potentially be costly) before it is too late?
If you are unfortunate enough to experience a break-in to your property while your existing security system is not intact (having not been serviced and maintained), your insurance provider may use that against any claims that you try to make to replace any lost possessions, as well as repair any break-in damage to your home (such as a smashed window for entry).
Imagine arriving home after a holiday, work or even after a quick trip to the shops and seeing your front door wide open, your belongings trashed and most of your valuables and possessions missing - with your alarm system completely unaware.
After something like this happens, it can be very difficult to feel safe in your own home (the place you should feel safest in the first place) as every sound, bang and clatter no matter how familiar is viewed as a threat.
How can Century help?
In order to avoid such scenarios, Century Electronic Security Ltd recommends investing in an Intruder Alarm System that is regularly serviced by your provider, as it is vital any system is kept in good working order. A regular maintenance visit from one of our qualified and experienced engineers will ensure that any Security System remains effective and prevents any potential faults from occurring.
We can take over the maintenance on any security system which has been installed or maintained by any other security company. We understand that you have your own requirements and we can design and implement a service and maintenance package in accordance to these.
Talk to us today about Intruder Alarm Systems
Whether you have an existing Intruder Alarm System installed or you require a new Intruder Alarm installation, we can help you select the best solution to secure your home or business.
Please do not hesitate to contact us today on 0800 052 6070 and see exactly how we can keep you, your family and your property protected.